The utilization of finite field multipliers is pervasive in contemporary digital systems, with hardware implementation for bit parallel operation often necessitating millions of logic gates. However, various digital design issues, whether natural or stemming from soft errors, can result in gate malfunction, ultimately leading to erroneous multiplier outputs. Thus, to prevent susceptibility to error, it is imperative to employ an effective finite field multiplier implementation that boasts a robust fault detection capability. This study proposes a novel fault detection scheme for a recent bit-parallel polynomial basis multiplier over GF(2m), intended to achieve optimal fault detection performance for finite field multipliers while simultaneously maintaining a low-complexity implementation, a favored attribute in resource-constrained applications like smart cards. The primary concept behind the proposed approach is centered on the implementation of a BCH decoder that utilizes re-encoding technique and FIBM algorithm in its first and second sub-modules, respectively. This approach serves to address hardware complexity concerns while also making use of Berlekamp-Rumsey-Solomon (BRS) algorithm and Chien search method in the third sub-module of the decoder to effectively locate errors with minimal delay. The results of our synthesis indicate that our proposed error detection and correction architecture for a 45-bit multiplier with 5-bit errors achieves a 37% and 49% reduction in critical path delay compared to existing designs. Furthermore, the hardware complexity associated with a 45-bit multiplicand that contains 5 errors is confined to a mere 80%, which is significantly lower than the most exceptional BCH-based fault recognition methodologies, including TMR, Hamming's single error correction, and LDPC-based procedures within the realm of finite field multiplication.

翻译：暂无翻译